HP PCL/PJL reference (PCL 5 Printer Language) - Technical Quick Reference Guide

EN 1
1
Factory Default Print Environment Feature Settings (PCL)
JOB CONTROL
• NUMBER OF COPIES* = 1
• DUPLEX* = Off (Simplex)
• BINDING* = Long-Edge
• TRAY LOCK= All trays unlocked
• JOB SEPARATION = OFF
• MANUAL FEED* = OFF
• REGISTRATION (left = 0, top = 0)
• OUTPUT BIN = Upper
• UNITS OF MEASURE = 300 Units/Inch
PAGE CONTROL
• PRINT DIRECTION = 0
• CHARACTER TEXT PATH DIRECTION* = 0
• TEXT PARSING METHOD* = 0
• ORIENTATION* = Portrait
• PAGE SIZE* = Letter
• PAPER (MEDIA) SOURCE = Main Source (Printer Specific)
• VERTICAL MOTION INDEX * = 8 (6 lpi)
• HORIZONTAL MOTION INDEX = 12 (10 cpi)
• TOP MARGIN = 1/2" (150 dots or 3 lines)
• TEXT LENGTH = 60 lines
• LEFT MARGIN = Left logical page boundary
• RIGHT MARGIN = Right logical page boundary
• PERFORATION SKIP = On
• LINE TERMINATION = CR=CR, LF=LF, FF=FF
FONT SELECTION**
• SYMBOL SET* = ROMAN-8 ***
• SPACING = Fixed
• PITCH = 10 cpi
• HEIGHT = 12 point
• STYLE = Upright
• STROKE WEIGHT = Medium
• TYPEFACE = Courier
• UNDERLINING MODE = Off
FONT MANAGEMENT
• FONT ID = 0
• CHARACTER CODE = 0
• SYMBOL SET ID = 0
MACRO
• MACRO ID = 0
Note: Feature support varies with each printer. See the PCL 5
Comparison Guide for specific feature support information.
* For these items, select User Default values using the printer driver or
control panel (or remote control panel for LaserJet 4L, 5L, and 5P).
** The font characteristics are determined by the default font. The default
font can be the factory default font or the user selected default font from
the control panel or from a font cartridge with a default font.
*** PC-8 is the default symbol set for the LaserJet 5L and 5Si/5SiMx
printers.
Learn.fm Page 1 Tuesday, June 22, 1999 8:17 AM