HP PCL/PJL reference (PCL 5 Printer Language) - Technical Quick Reference Guide

14 EN
14
Font Management
Font ID #
Specifies an identification number (ID #) for use in subsequent font
management commands.
? * c # D
# = ID # (0 through 32767)
Font Control
Provides the means for manipulating soft fonts within the printer.
? * c # F
# = 0 - Delete all soft fonts
1 - Delete all temporary soft fonts
2 - Delete soft font (last ID specified)
3 - Delete Character Code (last ID and character code)
4 - Make soft font temporary (last ID specified)
5 - Make soft font permanent (last ID specified)
6 - Copy/Assign current invoked font as temporary
Alphanumeric ID
Specifies alphanumeric String IDs for fonts, macros, and media types.
Specifies media selection by the type of media and supports enhancements
for the printer disk drive.
? & n # W
[operation][string]
# = Number of bytes of string data
Operations
0 - Set the current Font ID to the given String ID.
1 - Associates current Font ID to font with supplied
String ID.
2 - Selects the font referred to by the String ID as primary.
3 - Selects the font referred to by the String ID as
secondary.
4 - Sets the current Macro ID to the String ID.
5 - Associates the current Macro ID to the supplied
String ID.
20 - Deletes the font association named by the current
Font ID.
21 - Deletes the macro association named by the current
Macro ID.
100 - Media select
Note: See the PCL 5 Printer Language Technical Reference Manual for
additional information about the Font Descriptor command and the
Character Descriptor command data fields.
Learn.fm Page 14 Tuesday, June 22, 1999 8:17 AM