HP LaserJet 2300 printer - External Software Technical Reference

portrait and landscape page orientation by clicking on the image. The light-yellow dimensions label that appears below
the preview image reflects the selected page size. The horizontal dimension is always first, so the order of the
numbers reverses when the orientation changes. Click on the label to toggle between English and metric units.
Print Task Quick Sets
Print Task Quick Sets is a setting that is available on all tabs except the NT Forms and Configure tabs and that is
used to store the current combination of driver settings that are found on all other tabs (except the NT Forms and
Configure tabs). Print task quick sets are either preset or user-defined printing specifications (such as paper size,
pages per sheet, and so on).
Print Setting Defaults
The default setting is Defaults. Other settings are User's Manual and Untitled. When Defaults is selected, nearly all
of the settings are restored to the combination that existed after the driver was installed (the original settings).
However, if the attribute combinations that are associated with watermark definitions, custom paper sizes, or the User
Manual Print Settings quick set have been changed or deleted, the original settings are not restored.
The Defaults setting appears automatically if no other driver settings have been changed since the driver was
installed, or if all driver settings match the original settings. Otherwise, the setting in the Print Task Quick Sets menu
have the same label that appeared when you last closed the printing Properties dialog box by clicking OK.
The following table shows the default settings for Print Task Quick Sets. See "HP Driver Preconfiguration" for
information about preconfigurable driver settings.
Table 10: Print Task Quick Set default values for the HP LaserJet 2300 printer
Driver feature
U.S. English Print Task
Quick Sets default
values
Other language default
setting (if different)
Preconfigurable
1
Print on both sides Off Yes
Flip pages up Off Yes
Booklet printing Off Yes
Pages per sheet 1 Yes
Print page border Off Yes
Page order Right, then down Yes
Print quality Best quality Yes
EconoMode Off Yes
Current setting PCL 6: This is the "Faster
Printing" setting
PCL 5e: This is the "Best
Quality" setting
No
Rendering mode (PCL 5e
only)
Automatic No
Resolution PCL 6: FastRes 1200
PCL 5e: 600 dpi
No
REt On No
Scale patterns
(WYSIWYG)
On No
Print text as black Off Yes
TrueType as bitmaps Off - send TrueType fonts
as outlines
On (in Thai only) Yes (except in Thai)
Print document on Off - print on the size
specified in the Paper tab
Yes
Size to print on Letter Default value depends on
regional paper size
Yes
Scale to fit On Yes
Software Technical Reference HP traditional PCL 5e and PCL 6 driver features 57