HP PCL/PJL reference (PCL 5 Printer Language) - Technical Quick Reference Guide

EN 5

Job Control (continued)

Duplex Page Side Selection

Prints the logical page on the specified physical page side.

? & a # G

# = 0 - Select next side

1 - Select front side

2 - Select back side

If a non-duplex printer receives this command, it performs a page eject.

Job Separation

Toggles the printer's job separation mechanism.

? & l 1 T

Output Bin

Selects the output paper bin for paper output.

? & l # G

# = 0 - Automatic selection

1 - Upper Output Bin (for the LaserJet 5Si,

printer top/face-down bin—bin #1)

2 - Rear Output Bin (for the LaserJet 5Si, printer

left/face-up bin—bin #2; this bin is not available

when the High Capacity Output (HCO) is attached)

3 - Selects Bin #3 (HCO face-up bin)

4 - Selects Bin #4 (HCO #1 face-down bin)

5 - Selects Bin #5 (HCO #2 face-down bin)

6 - Selects Bin #6 (HCO #3 face-down bin)

7 - Selects Bin #7 (HCO #4 face-down bin)

8 - Selects Bin #8 (HCO #5 face-down bin)

9 - Selects Bin #9 (HCO #6 face-down bin)

10 - Selects Bin #10 (HCO #7 face-down bin)

11 - Selects Bin #11 (HCO #8 face-down bin)

Unit of Measure

Establishes the unit of measure for the PCL unit.

? & u # D

# = Number of units/inch (96, 100, 120, 144, 150, 160, 180, 200,

225, 240, 288, 300, 360, 400, 450, 480, 600, 720, 800, 900,

1200, 1440, 1800, 2400, 3600, 7200)

Learn.fm Page 5 Tuesday, June 22, 1999 8:17 AM