HP PCL/PJL reference - Printer Job Language Technical Reference Addendum

14 Chapter 2 Job Finishing ENWW
PJL commands for the 3,000-sheet stacker
Use the following command sequences for the HP LaserJet 9000 series products with the 3,000-
sheet stacker accessory (product number C8084A) installed.
To set the destination to the stacker bin
Use the following command sequence to send the job to the stacker.
ESC%-12345X
@PJL SET OUTBIN=OPTIONALOUTBIN2
@PJL SET FINISH=NONE
ESC%-12345X
To set the destination to the top output bin of the printer
Use the following command sequence to send the job to the top output bin of the printer.
ESC%-12345X
@PJL SET OUTBIN=UPPER
@PJL SET FINISH=NONE
ESC%-12345X
To set the destination to the face-up bin
Use the following command sequence to send the job to the face-up bin.
ESC%-12345X
@PJL SET OUTBIN=OPTIONALOUTBIN1
@PJL SET FINISH=NONE
ESC%-12345X
Note The default destination is used whenever the PJL OUTBIN variable is not set.
To set the default output bin, use the control panel on the front of the product, or use HP Web
Jetadmin.