HP PCL/PJL reference - Printer Job Language Technical Reference Manual

6-6 Environment Commands EN
Example: Changing Environment Settings
This example shows the values stored in the different environments
when commands are issued. The example begins with the number of
copies set to 1 in all environments (the Factory Default Environment
setting). The table reflects the current settings after each command.
Environment Summary
As indicated previously, each print environment differs in relation to
how it is stored, how the settings are changed, and how the PJL
Current Environment can be defaulted. The table on the following
page summarizes the characteristics of each print environment. For
those printers without a control panel, disregard any mention of
control panels. In these printers, User Default Environment features
are controlled using just the DEFAULT command.
Note See Appendix A for a list of environment variables supported by each
PJL printer.
Command Sent
Environment Setting
Factory
Default
User
Default
PJL
Current
Modified
Print
After PJL INITIALIZE or RESET
MENU
1111
@PJL DEFAULT COPIES=3 1311
@PJL SET COPIES = 4 1344
@PJL ENTER
LANGUAGE=PCL<LF>
<ESC>&l5X
1345
<ESC>%-12345X 1333