Latest News: Firmware Version 5.30 - 5969-6812

22 Latest News: Firmware Version 5.30
Verifying Macintosh Settings.
On the
Detailed View
’s
Protocol
page (see “Server Configuration Using Detailed View” on page 21),
click the
Mac (AFP)
tab and verify the settings; they are the same
ones available in the wizard. See the illustration below. Click
[OK]
and you will return to the
Quick Setup
configuration page. If you
make any changes, click
[Restart Server]
to put the changes into
effect.
Network Time Protocol.
For automatic time synchronization you
can use the Network Time Protocol (NTP, as defined by RFC 1769).
Under the
Administration
tab, click
[This Server]
and with the
server module highlighted, click
[Settings]
. On the resulting
properties page, select the
Date & Time
tab. Select
Automatically
and
Network Time Protocol (NTP)
. Then for
NTP Server
, specify the
IP address or Internet domain name of the time server. Click
[Save]
.
Server Password.
To protect the system files, it is important that
you change the server password for the administrator’s web access.
(For example, users are prompted for the server password when
trying to access the
Administration
or
Quick Setup
web page for the
first time during a session.) Click the
Administration
tab, click
[This
Server]
and with the server module highlighted, click
[Settings]
. On
the resulting properties page, select the
General
tab. Change and
confirm the password. Click
[Save]
. This new password takes effect
without restarting the server.