HP IBRIX X9720 Network Storage System Capacity Block Installation Instructions (AW549-96036, June 2012)

Base cabinet
Callouts 1 through 3 indicate additional X9700c
components.
X9700c 41
X9700c 32
X9700c 23
X9700c 14
SAS switch ports 1 through 4 (in interconnect bay 3 of the
c-Class Blade Enclosure). Ports 2 through 4 are used by
additional capacity blocks.
5
Reserved for expansion cabinet use.6
SAS switch ports 1 through 4 (in interconnect bay 4 of the
c-Class Blade Enclosure). Ports 2 through 4 are used by
additional capacity blocks.
7
Reserved for expansion cabinet use.8
Expansion cabinet
X9700c 81
X9700c 72
X9700c 63
X9700c 54
Used by base cabinet.5
SAS switch ports 5 through 8 (in interconnect bay 3 of the
c-Class Blade Enclosure).
6
Used by base cabinet.7
SAS switch ports 5 through 8 (in interconnect bay 4 of the
c-Class Blade Enclosure).
8
Step 5—Connect the power cords
WARNING! To reduce the risk of electric
shock or damage to the equipment:
• Do not disable the power cord grounding
plug. The grounding plug is an important
safety feature.
• Plug the power cord into a grounded
(earthed) electrical outlet that is easily
accessible at all times.
• Do not route the power cord where it can
be walked on or pinched by items placed
against it. Pay particular attention to the
plug, electrical outlet, and the point where
the cord extends from the storage system.
The X9720 Network Storage System cabinet comes
with the power cords tied to the cabinet. Connect the
Page 4