Mac OS X Fibre Channel connectivity to the HP StorageWorks Enterprise Virtual Array storage system configuration guide (5697-0025, August 2009)
Figure 3 Device Listing pane
Table 4 Tabs on the Configuration Options pane
TabsDevice
Basic Info—Displays general information about the host
Notifications—Displays notifications about the host
See “Localhost device” on page 21
Localhost
Basic Info—Displays general information about the adapter
Flash—Displays the current revision of the flash code
Advanced—Not supported with ATTO Celerity FC Adapters
See “Adapter device” on page 22
Adapter
NVRAM—Displays NVRAM settings, which you can change from this window
PCI Info—Displays general information about the ATTO Fibre Channel card chip
and silicon
See “Channel device” on page 23
Channel
Paths—Displays port paths to the EVA controller
Target—Displays target status information for a specified port
Adapter—Displays adapter status information for a specified port
Statistics—Displays average and total statistics for a specified port
See “EVA controller” on page 26
EVA controller
Basic Info—Displays general information about the LUN
Flash—Not used
Advanced—Not supported with Mac OS X
See “LUN device” on page 33
LUN
Localhost device
Select localhost from the Device Listing to view information and notifications about the host system.
You cannot change the information that is displayed.
Mac OS X Fibre Channel connectivity to the HP StorageWorks Enterprise Virtual Array storage system
configuration guide 21