HP StorageWorks EVA6400/8400 M6412A disk enclosure installation instructions

Figure 7 Slide disk enclosure onto rails
3. Continue sliding the enclosure into the rack until the front edge is flush with the front of the rack
(1, Figure 8 (page 7)). Tighten the enclosure thumbscrews into the rack (2), taking care not to
strip the thumbscrews.
Figure 8 Tighten disk enclosure thumbscrews
4. Reattach the front bezel covers.
5. At the rear of the rack, loosen the thumbscrew on the shipping retaining bracket (1, Figure 9 (page
7)) and slide the bracket forward (2, Figure 9 (page 7)) until the tab engages the slot in the
chassis. Tighten the thumbscrew on the bracket.
Figure 9 Secure rear of enclosure
Installing the disk enclosure 7