HP Enterprise Virtual Array 6400/8400 Expansion Rack Reference Guide (5697-1818, March 2012)

Figure 11 Slide disk enclosure onto rails
3. Continue sliding the enclosure into the rack until the front edge is flush with the front of the
rack (1, Figure 12 (page 14)). Tighten the enclosure thumbscrews into the rack (2), taking
care to not strip the Phillips-head thumbscrews.
Figure 12 Tighten disk enclosure thumbscrews
4. Reattach the front bezel covers.
5. At the rear of the rack, loosen the thumbscrew on the shipping retaining bracket (1,
Figure 15 (page 15)) and slide the bracket forward (2, Figure 15 (page 15)) until the tab
engages the slot in the chassis. Tighten the thumbscrew on the bracket.
14 Installing disk enclosures into the expansion rack