Fabric OS MIB Reference v6.4.0 (53-1001768-01, June 2010)

Fabric OS MIB Reference 237
53-1001768-01
connUnitTable 1.3.6.1.3.94.1.6
8
USER Replace with username
PASSWORD Replace with password
GLOBALID Replace with global ID
SERIALNO Replace with serial number
The expected value for system URL.0 is:
http://{a.b.c.d}
where {a.b.c.d} is the IP address of the switch if a Web Tools license is available.
“” (null)
where “” is used when a Web Tools license is not available.
connUnitTable 1.3.6.1.3.94.1.6
A list of units under a single SNMP agent. The number of entries is given by the value of uNumber.
The value is 1 for stand-alone system.
connUnitEntry 1.3.6.1.3.94.1.6.1
A connectivity unit entry containing objects for a particular unit.
Index connUnitId
connUnitId 1.3.6.1.3.94.1.6.1.1
The unique identification for this connectivity unit among those within this proxy domain. The value
must be unique within the proxy domain because it is the index variable for connUnitTable. The
value assigned to a given connectivity unit should be persistent across agent and unit resets. It
should be the same as connUnitGlobalId if connUnitGlobalId is known and stable.
The Brocade implementation maps the switch WWN to the top 8 octets of this variable and sets the
remaining lower 8 octets to 0.
To specify a particular instance of any columnar variable in the connUnitEntry (such as
connUnitType), specify the instance identifier as a 16-octet value.
connUnitType.10.0.0.60.69.4.11.19.0.0.0.0.0.0.0.0
where the object instance identifier consists of 16 octets, each representing the byte value from
high-byte order to low-byte order of this 128-bit integer.
connUnitGlobalId 1.3.6.1.3.94.1.6.1.2
An optional global-scope identifier for this connectivity unit. It must be a WWN for this connectivity
unit or 16 octets of value 0.
The following characteristics are required.
WWN formats requiring fewer than 16 octets must be extended to 16 octets with trailing 0
octets.
If a WWN is used for connUnitId, the same WWN must be used for connUnitGlobalId.