Fabric OS MIB Reference v6.4.0 (53-1001768-01, June 2010)

176 Fabric OS MIB Reference

53-1001768-01

swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4

Values Possible values are:

• noCard (1) No card is present in this switch slot.

• noTransceiver (2) No Transceiver module in this port (Transceiver is the generic name for GBIC,

SFP, and so on).

• laserFault (3) The module is signaling a laser fault (defective GBIC).

• noLight (4) The module is not receiving light.

• noSync (5) The module is receiving light but is out of sync.

• inSync (6) The module is receiving light and is in sync.

• portFault (7) The port is marked faulty (defective GBIC, cable, or device).

• diagFault (8) The port failed diagnostics (defective G_Port or FL_Port card or motherboard).

• lockRef (9) Port is locking to the reference signal.

• validating (10) The module is being validated.

• invalidModule (11) The module is invalid.

• unknown(255) The module is unknown.

swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4

The operational status of the port.

Values Possible values are:

• unknown (0) The port module is physically absent.

• online (1) User frames can be passed.

• offline (2) No user frames can be passed.

• testing (3) No user frames can be passed.

• faulty (4) The port module is physically faulty.

swFCPortAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5

The desired state of the port. A management station might place the port in a desired state by

setting this object accordingly.

Based on the port status, this OID returns one of the following:

• Online -- When queried port is online.

• Offline -- When queried port is offline.

• Faulty -- When port is in faulty state.

This OID is settable, the following values can be used to set:

• Online -- To change port's state to Online.

• Offline -- To change port's state to Offline.