Fabric OS MIB Reference v6.4.0 (53-1001768-01, June 2010)

86 Fabric OS MIB Reference
53-1001768-01
fcFxPortPhysLastChange 1.3.6.1.2.1.75.1.2.2.1.3
3
1: online (1)
2: offline (2)
3: testing (3)
4: linkFailure (4)
The testing state (3) indicates that no operational frames can be passed. If
fcFxPortPhysAdminStatus is offline (2), then fcFxPortPhysOperStatus should be offline (2). If
fcFxPortPhysAdminStatus is changed to online (1), then fcFxPortPhysOperStatus should change to
online (1) if the Fx_Port is ready to accept fabric login request from the attached Nx_Port; it should
proceed and remain in the linkFailure (4) state only if there is a fault that prevents it from going to
the online state (1).
fcFxPortPhysLastChange 1.3.6.1.2.1.75.1.2.2.1.3
The value of sysUpTime at the time the Fx_Port entered its current operational status. A value of 0
indicates that the Fx_Port operational status has not changed since the agent last restarted.
fcFxPortPhysRttov 1.3.6.1.2.1.75.1.2.2.1.4
The Receiver_Transmitter_Timeout value of the Fx_Port. This is used by the receiver logic to detect
loss of synchronization. This value is displayed in milliseconds.
NOTE
This object is read-only. It is listed incorrectly in the MIB definition as read-write.
Fx_Port Fabric login table
This table contains one entry for each Fx_Port in the fabric element and the service parameters
that have been established from the most recent fabric login, whether implicit or explicit.
fcFxloginTable 1.3.6.1.2.1.75.1.2.3
A table that contains services parameters established from the most recent fabric login, explicit or
implicit, one entry for each Fx_Port in the fabric element.
fcFxloginEntry 1.3.6.1.2.1.75.1.2.3.1
An entry containing service parameters established from a successful fabric login.
Indexes 1: fcFeModuleIndex
2: fcFxPortIndex
3: fcFxPortNxLoginIndex