DCFM Professional Plus User Manual (53-1001774-01, June 2010)

668 DCFM Professional Plus User Manual
53-1001774-01
User Privileges
C
FCIP Management Allows you to configure
FCIP tunnels and
troubleshooting of IP
interfaces (IP
performance, IP ping and
IP trace route).
Disables the Configure >
FCIP Tunnel and
Configure > IP
Troubleshooting
commands. Disables the
FCIP Tunnel command on
the Fabric right-click
menu.
Enables the Configure >
FCIP Tunnel and
Configure > IP
Troubleshooting
commands.
Only enables the Cancel
function for the dialog
boxes.
Enables the Configure >
FCIP Tunnel and
Configure > IP
Troubleshooting
commands.
Enables all commands
and functions on the
associated dialog boxes.
Also enables all
commands on the FCIP
Tunnels tab in the
device’s Properties dialog
box.
FCoE Management Allows you to configure
FCoE devices.
Disables the Switch >
FCoE command from the
Configure menu.
Enables the Switch >
FCoE command from the
Configure menu.
Disables all commands
and functions on the
dialog box except the
Close, Cancel, and Help.
Enables the Switch >
FCoE command from the
Configure menu.
Enables all commands
and functions on the
dialog box.
FICON Management Allows you to configure
Cascade FICON Fabric
and Cascade FICON
Fabric Merge.
Also allows you to
configure block ports and
allow/prohibit matrix on
active configuration or
any offline configurations.
Disables the Configure
Fabric, Merge Fabrics
commands on the
Configure > FICON menu.
Disables the
Allow/Prohibit Matrix
command from the
Configure menu and
right-click menu.
Disables the Configure
Fabric, Merge Fabrics
commands on the
Configure > FICON menu.
Enables the
Allow/Prohibit Matrix
command from the
Configure menu and
right-click menu.
Disables all commands
and functions on the
Configure Allow/Prohibit
Matrix dialog box except
the Close and Help
.
Enables the Configure
Fabric, Merge Fabrics
commands on the
Configure > FICON menu.
Enables the
Allow/Prohibit Matrix
command from the
Configure menu and
right-click menu.
Enables all commands
and functions on the
associated dialog boxes.
Firmware Management Allows you to download
firmware to selected
switches and manage the
firmware repository.
Disables the Firmware
Management command
from the Configure menu
and right-click menu.
Enables the Firmware
Management command
from the Configure menu
and right-click menu.
Disables all commands
and functions on the
dialog box except the
Close and Help.
Enables the Firmware
Management command
from the Configure menu
and right-click menu.
Enables all commands
and functions on the
dialog box.
TABLE 41 Privileges and Application Behavior (Continued)
Privilege Description No Privilege Read-Only Read/Write