DCFM Professional Plus User Manual (53-1001774-01, June 2010)

DCFM Professional Plus User Manual 435
53-1001774-01
16
Editing FCIP circuits
FCIP circuit settings may be edited from the Edit FCIP Circuit dialog box. The procedure for
launching this dialog box for the 4 Gbps Router, Extension Switch and Blade is different than the
procedure for the 8 Gbps 16-FC ports, 6-Gbit ports Extension Switch and the 8 Gbps 12-FC port, 10
GbE ports, 2-10 GbE ports Extension blade. The 4 Gbps Router, Extension Switch and Blade have
only one circuit per tunnel, and the circuit is edited as part of the tunnel. The 8 Gbps 16-FC ports,
6-Gbit ports Extension Switch and 8 Gbps 12-FC port, 10 GbE ports, 2-10 GbE ports Extension
blade may have multiple circuits per tunnel, and circuits may be selected individually.
For the 4 Gbps Router, Extension Switch and Blade:
1. From the FCIP Tunnels dialog box, select the tunnel you want to edit.
2. Select Edit Tunnel.
The Edit FCIP Tunnel dialog box displays.
3. Select Edit FCIP Circuit.
The Edit FCIP Circuit dialog box displays.
For the 8 Gbps 16-FC ports, 6-Gbit ports Extension Switch and the 8 Gbps 12-FC port, 10 GbE
ports, 2-10 GbE ports Extension blade:
1. From the FCIP Tunnels dialog box, select the tunnel you want to edit.
2. Select the Circuit tab.
3. Select a circuit from the circuit properties table.
4. Select Edit Circuit.
The Edit FCIP Circuit dialog box displays (Figure 146).