DCFM Professional Plus User Manual (53-1001774-01, June 2010)

82 DCFM Professional Plus User Manual
53-1001774-01
3
5. Click Search.
All devices with the specified name (or partial name) are highlighted in the Display table. You
may need to scroll to see all highlighted names.
6. Click OK to close the Configure Names dialog box.
Searching for a device by WWN
You can search for objects (switch, fabric, product, ports, or N Ports) by WWN (world wide name). To
search for a name in the Connectivity Map, refer to “Searching for a device in the connectivity map”
on page 139.
To search by WWN, complete the following steps.
1. Select Configure > Names.
The Configure Names dialog box displays.
2. Select All Names from the Display list.
3. Select WWN from the Scope list.
4. Enter the WWN you want to search for in the Search field.
You can search on partial WWNs.
NOTE
To search for a device, the device must be discovered and display in the topology.
5. Click Search.
All devices with the specified WWN (or partial WWN) are highlighted in the Display table. You
may need to scroll to see all highlighted WWNs.
6. Click OK to close the Configure Names dialog box.