Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)

910 Fabric OS Command Reference
53-1001764-01
sfpShow
22
-all
Displays detailed data for all available SFPs on the switch. This operand is not
compatible with slot/port operands.
-health
Displays SFP health status information from Fabric Watch for 10G and 16G SFPs
and for 16G QSFPs (Quad Small Form-factor Pluggables). When Fabric Watch
monitoring of SFPs is enabled with the thMonitor command, Fabric Watch
monitors diagnostic SFP parameters such as current, voltage, receiver power,
transmit power, and temperature. When any of these parameters crosses
user-configured low and high thresholds the SFP health state changes Possible
health states include the following:
Green
SPF operates within Fabric Watch thresholds.
Yellow
At least one SFP parameter monitored by Fabric Watch has crossed a low or high
threshold.
No License
The switch does not have a Fabric Watch License
Unknown
This state displays for 8G, 4G and 2G SPF types not supported by this feature.
Paused
Health monitoring is not enabled on the switch.
The detailed view displays the total number of Fabric Watch state transitions for
each SFP. To configure the SFP state changes, use the fwFruCfg command. The
detailed view also displays the power-on time for 16G SFPs and QSFPs only.
EXAMPLES To display SFP information including SFP health parameters on a Brocade DCX 8510-8:
switch:admin> sfpshow -health
Slot 1/Port 0: id
Slot 1/Port 1: id
Slot 1/Port 2: id
Slot 1/Port 3: id
Slot 1/Port 4: id
Slot 1/Port 5: id
Slot 1/Port 6: id
Slot 1/Port 7: id
Slot 1/Port 8: id
Slot 1/Port 9: id
Slot 1/Port 10: id
Slot 1/Port 11: id
Slot 1/Port 12: id
Slot 1/Port 13: id
Slot 1/Port 14: id
Slot 1/Port 15: id
Slot 2/Port 0: id
Slot 2/Port 1: id
Slot 2/Port 2: id
Slot 2/Port 3: id
Slot 2/Port 4: id
Slot 2/Port 5: id
Slot 2/Port 6: id
Slot 2/Port 7: id
Slot 2/Port 8: id
Slot 2/Port 9: id
Slot 2/Port 10: id