Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)

Fabric OS Command Reference 771
53-1001764-01
portShow
22
To view xlate domains, you must issue the command on chassis with a Brocade FR4-18i blade. Note that
the Front Domain ID is what is shown:
switch:admin> portshow 8/4
portName: slot8port4
portHealth: No Fabric Watch License
Authentication: None
EX_Port Mode: Enabled
Fabric ID: 20
Front Phantom: State: OK
Cur Dom ID: 160 WWN: 50:00:51:e3:60:ee:0e:14
Pr Switch Info: Dom ID: 5
WWN: 10:00:00:05:1e:34:02:04
Fabric params: R_A_TOV: 10000 E_D_TOV: 2000 PID fmt: core
Authentication Type: None
Hash Algorithm: N/A
DH Group: N/A
Edge fabric's primary wwn: N/A
Edge fabric's version stamp: N/A
portDisableReason: None
portCFlags: 0x1
portFlags: 0x903 PRESENT ACTIVE G_PORT U_PORT \
EX_PORT LOGICAL_ONLINE LOGIN
portType: 10.0
portState: 1 Online
portPhys: 6 In_Sync
portScn: 1 Online Trunk master port
port generation number: 160
portId: 965400
portIfId: 43820005
portWwn: 20:54:00:05:1e:36:0e:e0
portWwn of device(s) connected:
Distance: normal
portSpeed: N2Gbps
LE domain: 0
Interrupts: 49 Link_failure: 0 Frjt: 0
Unknown: 0 Loss_of_sync: 2 Fbsy: 0
Lli: 27 Loss_of_sig: 4
Proc_rqrd: 143 Protocol_err: 0
Timed_out: 0 Invalid_word: 0
Rx_flushed: 0 Invalid_crc: 0
Tx_unavail: 0 Delim_err: 0
Free_buffer: 0 Address_err: 1
Overrun: 0 Lr_in: 2
Suspended: 0 Lr_out: 2
Parity_err: 0 Ols_in: 0
2_parity_err: 0 Ols_out: 2
CMI_bus_err: 0
Port part of other ADs: No