Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)

986 Fabric OS Command Reference

53-1001764-01

switchShow

1211 8 59 0 ------ -- 16G No_Module FC

1212 8 60 0 ------ -- 16G No_Module FC

1213 8 61 0 ------ -- 16G No_Module FC

1214 8 62 8 ------ id 16G No_SigDet FC

1215 8 63 8 ------ id 16G No_SigDet FC

To display media type information (relevant output excerpts only):

• The following example shows switchshow output for the ge0 and ge1 ports on a Brocade 7800.

The ge0 port is a copper port (default). The ge1 has an SFP installed (copper or optical):

[...]

ge0 cu 1G No_Sync FCIP Copper

ge1 id 1G No_Light FCIP

ge2 -- 1G No_Module FCIP

ge3 -- 1G No_Module FCIP

ge4 id 1G Online FCIP

ge5 -- 1G No_Module FCIP

[...]

• This example shows switchshow output for a Brocade 5100. Port 31 has an SFP installed. Nothing

is installed on Port 32.

[...]

31 31 421f00 id N4 In_Sync FC Disabled

32 32 422000 -- N8 No_Module FC Disabled

[...]

• The sfpShow output for the same switch displays the serial number for the SFP.

[...]

Port 31: id (sw) Vendor: BROCADE Serial No: UAF1081800000MK

Speed: 200,400,800_MB/s

Port 32: --

[...]

SEE ALSO fabricName, portCfgLongDistance, switchDisable, switchEnable, switchName