HP StorageWorks Enterprise Modular Library E-Series User Guide (AH876-96001, September 2007)

Operator contr
ol panel
The OCP display
s library status information and allows you to access the library menus with a touch
screen. Use these menus to view and change the library settings, move tape cartridges, obtain status
information, or run diagnostic tests. Functions provided by the OCP are:
• Robotic and tape drive firmware revision reporting
• Library config
uration
• Libra ry and tape drive serial number reporting
• Critical comp onent status report
• Critical com
ponent failure notifica tion
• Ability to move tapes to a nd from any location
• Ability to configure bar code label length and justification reporting to the front panel a nd to
the host
• Access to error information
• Adjust screen contrast
10951
3
Figure 16 Location of the OCP
Numbering
All of the tape cartridge slots and tape drives in a library are numbered with a coordinate system.
You might see these numbers in your application software or in error or diagnostic messages. Error
messages often include a slot location in the format MRC x,y,z.Thisidentifies a module (x), row
(y), and column (z)location.
Each module has a different number of available slots, but a common numbering scheme for identifying
theslotlocation.
The library numbers the LTO slots using the following scheme:
Enterprise Modular Library E-Series
31