HP StorageWorks Clustered Gateway (server/software bundle) 3.6.0 Windows Storage Server Edition Upgrade Guide (5697-7456, April 2008)

Chapter 2: Upgrade procedure 9
NOTE: The drive letter assignment may have changed in the node that
was upgraded to 3.6.0. To restore the original drive letter
assignment to all the filesystems and dynamic volumes, run the
command 'dledit -p' from path 'C:\Program Files\Hewlett-
Packard\HP Clustered File System\bin'.
Upgrading Subsequent Nodes
1. Boot using the HP Clustered Gateway 3.6.0 WSS x64 upgrade DVD
and Quick Restore (QR) the machine.
NOTE: During the QR process, if an error message "Partitionand
Format:CreatePartition:failed to create partition…" appears,
restart the QR process.
2. After the quick restore is complete:
a. Log in to the machine with the login name Administrator and
password hpinvent. Accept the 3.6.0 End User License
Agreement.
b. Make the network changes (restore the network and hostname
settings). Restore any other changes to settings such as teaming,
TCP/IP parameters, and so on. If the machine was in a domain
before the upgrade, rejoin it to the domain.
3. If you are using multi-pathing software, install it according to product
documentation.
4. Restore the contents of the \conf\debug directory. This directory was
backed up before starting the upgrade process (see “Back Up the
Cluster Configuration” on page 6).
NOTE: When prompted, "Do you want to replace the existing files?,"
click Yes to all.
5. Restore any Fibre Channel connections to the node.
6. Start the Management Console. When prompted "Cluster not
configured. Do you want to configure the cluster?," click Yes.