HP StorageWorks Clustered File System 3.6.1 for Windows installation guide (AP809-96008, October 2009)

Chapter3:InstallHPStorageWorksClusteredFileSystem 40
HPClusteredFileSystemthenfencestheserversinaccordancewiththe
methodyouspecifiedontheSAN&Fencingtab.Ifthecorrectserveris
notfenced,youwillneedtochecktheconfiguration.Forexample,ifyou
specifiedapatternfortheRemoteManagementController,theserver
maynot
beconfiguredtousethatpattern.
IfanincorrecthostnameorIPaddresswasspecifiedfortheRemote
ManagementControllerassociatedwiththeserver,exportthecluster
configurationtothatserveragainandthensupplythecorrect
information.
Install the Stand-Alone Management
Console
Forconvenience,theclustercanbemanagedfromaseparate
administrativestationratherthanfromaserverinthecluster.Toallow
youtodothis,theManagementConsoleandmxutilityareprovidedina
separatepackage(mxconsole_3.6.1.<xxxx>.<arch>.msi)thatcanbeinstalled
onPCsoutsidethecluster.
System Requirements
Systemsmustmeettheserequirements:
•Pentium‐compatibleprocessororlater
•64MBmemory
•Windows2000,WindowsXP,orWindows2003
Install and Start the Management Console
Toinstallthestand‐aloneManagementConsole,locatethefile
mxconsole_3.6.1.<xxxx>.<arch>.msionthedistributionCDorinyour
downloadlocation.Double‐clickthefileandthenruntheInstallation
Wizard.Tostartthestand‐aloneManagementConsole,selectStart>
Programs>HPClusteredGateway>HPCFSManagementConsole.