Setup Poster

10a
Windows
Macintosh
10b
© 2008 Hewlett-Packard Development Company, LP.
Windows® is a U.S registered trademark of Microsoft Corporation.
www.hp.com/support
USB
Install Windows printer software
1 A wizard displays on your computer.
2 Follow the screens.
3 Insert the CD when directed.
4 The HP wizard screen displays.
5 Follow onscreen instructions in the HP
wizard.
No screen?
1. Click the Start button, then select Run.
2. Click the Browse button.
3. Select HPPP CD in the Look in drop-down list.
4. Select Setup, then click the Open button.
5. Click
OK, then follow the onscreen
instructions.
If there is no plug and play, see the
Reference Guide.
If the Windows software
installation fails:
1 Remove the CD from the computer’s CD-ROM
drive, and then disconnect the USB cable from
the computer.
2 Restart the computer.
3 Temporarily display any software firewall and
close any anti-virus software. Re-start these
programs after the printer software is installed.
4 Insert the printer software CD in the
computer’s CD-ROM drive, then follow the
onscreen instructions to install the printer
software. Do not connect the USB cable until
you are told to do so.
5 After the installation finishes, restart the
computer.
Install Macintosh printer software
1 Insert the printer software CD into the
CD-ROM drive.
2 Double-click the CD icon in the Finder
window, if it is not already open.
3 Double-click the installer icon.
4 Accept the licensing agreement.
5 Click Install.
Wait for the installation to complete.
If the Installation Fails...
Make sure the printer is powered on.
Make sure the cable connections are secure.
Printed in <country> 04/2008
Need more help?
ติดตั้งซอฟต์แวร์เครื่องพิมพ์สำหรับระบบ
Windows
1 ตัวช่วยจะปรากฏขึ้นในเครื่องคอมพิวเตอร์
2 ปฏิบัติตามคำแนะนำบนหน้าจอ
3 ใส่แผ่นซีดีเมื่อได้รับคำแนะนำ
4 หน้าจอตัวช่วยติดตั้งของ HP จะปรากฏขึ้น
5 ปฏิบัติตามคำแนะนำบนหน้าจอตัวช่วยติดตั้งของ HP
หากการติดตั้งซอฟต์แวร์ในระบบ
Windows ล้มเหลว
1 . นำแผ่นซีดีออกจากไดรฟ์ซีดีรอมของ
เครื่องคอมพิวเตอร์ แล้วถอดสาย USB
ออกจากเครื่องคอมพิวเตอร์
2 รีสตาร์ทเครื่องคอมพิวเตอร์
3 ปิดการใช้งานซอฟต์แวร์ไฟร์วอลล์และซอฟต์แวร
์ป้องกันไวรัสลงชั่วคราว โปรดเริ่มโปรแกรมเหล่านี้
อีกครั้งหลังจากติดตั้งเครื่องพิมพ์เรียบร้อยแล้ว
4 ใส่ซีดีซอฟต์แวร์เครื่องพิมพ์ในไดรฟ์ซีดีรอม
ของเครื่องคอมพิวเตอร์ จากนั้นปฏิบัติตาม
คำแนะนำบนหน้าจอเพื่อติดตั้งซอฟต์แวร
์เครื่องพิมพ์อย่าเพิ่งถอดสาย USB ออกจนกว่า
จะได้รับคำแนะนำให้ทำเช่นนั้น
5 หลังการติดตั้งเสร็จสิ้น โปรดรีสตาร์ทเครื่อง
คอมพิวเตอร์
ไม่มีหน้าจอปรากฏขึ้น?
1.
คลิกปุ่ม Start (เริ่ม) แล้วเลือก Run (เรียกใช้)
2. คลิกปุ่ม Browse (เรียกดู)
3.
เลือก HPPP CD ในรายการแบบดร็อปดาวน์
Look in (มองหาใน)
4. เลือก Setup (ติดตั้ง) จากนั้นคลิกปุ่ม Open (เปิด)
5.
คลิก OK (ตกลง) แล้วปฏิบัติตามคำแนะนำบนหน้าจอ
หากไม่มีระบบปลั๊กแอนด์เพลย์ โปรดดูในคู่มืออ้างอิง
ติดตั้งซอฟต์แวร์เครื่องพิมพ์ในระบบ
Macintosh
1 ใส่แผ่นซีดีซอฟต์แวร์เครื่องพิมพ์ลงในไดรฟ์ซีดีรอม
2 ดับเบิลคลิกไอคอนรูปซีดีในหน้าต่าง Finder
(ระบบค้นหา) หากโฟลเดอร์ดังกล่าวไม่ปรากฏขึ้น
3 ดับเบิลคลิกไอคอนของโปรแกรมติดตั้ง
4 ยอมรับข้อตกลงว่าด้วยการอนุญาตให้ใช้งาน
5 คลิก Install (ติดตั้ง)
รอจนกระทั่งการติดตั้งเสร็จสมบูรณ์
หากการติดตั้งล้มเหลว...
ตรวจสอบว่าเครื่องพิมพ์เปิดอยู่
ตรวจสอบว่าสายสัญญาณเชื่อมต่ออยู่อย่างแน่นหนา
ต้องการความ
ช่วยเหลือเพิ่มเติม?
Menginstal perangkat lunak printer
Windows
1 Wizard akan muncul di layar komputer Anda.
2 Ikuti petunjuk di layar.
3 Masukkan CD setelah diminta.
4 Layar wizard HP akan ditampilkan.
5 Ikuti petunjuk pada layar di wizard HP.
Jika instalasi perangkat lunak
Windows gagal:
1 Keluarkan CD dari drive CD-ROM komputer,
kemudian lepaskan kabel USB dari komputer.
2 Hidupkan ulang komputer.
3 Nonaktifkan dahulu perangkat lunak firewall
dan matikan perangkat lunak anti-virus.
Jalankan kembali program-program ini
setelah perangkat lunak printer terinstal.
4 Masukkan CD perangkat lunak printer ke
dalam drive CD-ROM komputer, lalu ikuti
petunjuk pada layar untuk menginstal
perangkat lunak printer. Jangan
menghubungkan kabel USB sampai
Anda diminta untuk melakukannya.
5 Setelah instalasi selesai, hidupkan ulang
komputer.
Layar tidak muncul?
1. Klik tombol
Start, lalu pilih Run.
2. Klik tombol Browse (Jelajahi).
3. Pilih
HPPP CD dalam daftar drop-down
(tarik-turun) Look in (Cari di).
4. Pilih Setup, lalu klik tombol Open.
5. Klik
OK, kemudian ikuti petunjuk di layar.
Jika printer sudah dipasang tetapi tidak
langsung hidup, bacalah Pedoman Acuan.
Menginstal perangkat lunak
printer Macintosh
1 Masukkan CD perangkat lunak printer
ke dalam drive CD-ROM.
2 Klik dua kali ikon CD dalam jendela Finder
(Pencari), jika jendela CD belum terbuka.
3 Klik dua kali ikon installer (penginstal).
4 Terima persetujuan lisensi.
5 Klik Install (Instal).
Tunggu sampai instalasi selesai.
Jika Instalasi Gagal...
Pastikan printer sudah dihidupkan.
Pastikan sambungan kabel benar.
Perlu bantuan lagi?