(English) Windows Connect * User's Guide - C6413-90009

Using and Caring for Your Inkjet Print Cartridges

1 With the printer turned on, open the top cover.

In a few moments the print cartridge cradles automatically move to the center

of the printer and the Inkjet Print Cartridge light flashes.

2 Snap up the cradle latch from the top of the inkjet print cartridge to be

replaced.

3 Lift the cartridge out of the cradle.

4 Discard the empty cartridge.

5 Remove the replacement inkjet print cartridge from its packaging.

6 Carefully remove the protective vinyl tape from the replacement cartridge.

7 Place the cartridge into the now-empty print cartridge cradle and push the

cartridge firmly, straight down into the cradle.

8 Close the latch. You will notice some resistance when closing the latch. When

the latch is fully closed, you will hear a click.

9 Close the top cover.

You’ll hear the cradle mechanism move, returning to the home position on the

right side of the printer.

10 If the inkjet print cartridge light continues to blink after you install new

inkjet print cartridges, check the part numbers on the cartridges to ensure you

installed the correct ones:

895Cxi, 895Cse, 880C, 882C, 832C, 830C, 815C require:

Black HP 51645 Series

Tri-Color HP C1823 Series

810C, 812C require:

Black HP No. [15] (equivalent to C6615A)

Tri-Color HP No. [23] (equivalent to C1823 Series)

Keep new and used inkjet print cartridges out of the reach of children.

Note: Be careful not to touch the ink nozzles or the copper contacts.

Touching these parts of the inkjet print cartridge can result in clogs, ink failure,

or bad electrical connection. Also, do NOT remove the copper strip; these are

electrical contacts required for proper operation of the inkjet print cartridges.

Warning

dj895c.book Page 56 Monday, July 12, 1999 11:31 AM