(English) Windows Connect * User's Guide - C6413-90009

Printing from DOS Applications

Installing Additional Symbol Sets

Additional fonts may have been included in your printer. A separate disk, called

the DOS Character Set Installation disk, contains custom files for use with the HP

DeskJet Control Panel for DOS, allowing access to special symbol sets.

You only need to install the one file that supports your particular language. If you

are uncertain which language is included in your printer, check the serial number

label on the bottom of the printer for one of the following codes:

ARB Arabic

CYR Cyrillic

GRK Greek

HBR Hebrew

LIT Lithuanian

LTV Latvian

THA Thai

1 Install the HP DeskJet Control Panel for DOS as described earlier in this

appendix.

2 Put the DOS Character Set Installation disk into your computer’s floppy disk

drive.

3 From the DOS prompt on your hard disk drive (usually the C:\ drive), type the

drive designator for your floppy drive, followed by DIR, then press the Enter

key to display the subdirectories on the DOS Character Set Installation disk. For

example, type:

C:\>A:\DIR

4 Copy the appropriate SYMSETS.DAT file from the subdirectory for the language

of your printer to your \DESKJET directory. For example, to copy the file for the

Cyrillic language, type:

C:\>COPY A:\CYRILLIC\SYMSETS.DAT C:\DESKJET

and then press the Enter key.

5 Remove the DOS Character Set Installation from the floppy drive when the

copying process is completed.

dj895c.book Page 98 Monday, July 12, 1999 11:31 AM