(English) Windows Connect * User's Guide - C6413-90009

Creative Printing

5 Get the banner paper ready for the printer:

a. From the stack of banner paper, tear off the number of sheets you need to

print the banner. (You must have at least five sheets in the stack.)

b. Tear off and discard the perforated strips, if there are any.

c. Fan the stack so that the pages don’t stick together in the printer.

6 Put the paper into the

lower IN tray so that the

unattached edge is at the

top of the stack. Insert the

stack’s top edge first into

the IN tray until it stops.

7 Slide the paper adjusters

so that they fit snugly

against the edges of the

paper stack.

8 Push the IN tray back in.

9 Print the banner.

You’ll notice that the printer goes through some start-up movements before it

starts printing. Also, banner printing takes a while; it might be several minutes

before you see the results.

10 After your banner is printed, if the Resume light is blinking, press the

Resume button as many times as needed until all the banner paper is out of

the printer.

6410042

Unattached

Edge

dj895c.book Page 52 Monday, July 12, 1999 11:31 AM