(English) Windows Connect * User's Guide - C6413-90009

94
Printing from DOS Applications
E
Installing and Using the HP DeskJet Control Panel for
DOS
The HP DeskJet Control Panel for DOS software program is provided on the printer
software disks and on the printer software CD. Go to “Printer Software” on page 70
for information on obtaining printer software on diskettes.
Installing the HP DeskJet Control Panel for DOS
To access the printer’s features, install the HP DeskJet Control Panel for DOS as
described below.
Before you install the DOS control panel:
1 Perform all physical setup procedures given in Chapter 1 of this User’s Guide .
2 Make sure that both the computer and the printer are turned on. If necessary,
press the Power button to turn on the printer.
To install the DOS control panel from the CD:
1 Insert the printer software CD in your
computer’s CD-ROM drive.
2 At the DOS prompt (C:\>), type cd, then
your computer’s CD-ROM disk drive
designator (for example D:\), then type the
three-letter designator for your lnaguage
(see the list at the right) followed by a
backslash (for example enu\ for English),
then type DJCP\ then press Enter. for
example:
C:\> cd D:\ENU\DJCP
3 At the DOS prompt (such as
D:\ENU\DJCP>), type INSTALL and press
Enter.
4 Follow the instructions on the screen.
To install the DOS control panel from the floppy disks:
1 Insert the last Installation Disk of the floppy set into your computer’s floppy
disk drive.
Czech csy
Danish dan
Dutch nld
English enu
Finnish fin
French fra
German deu
Hungarian hun
Italian ita
Korean kor
Norwegian non
Polish plk
Portuguese ptb
Russian rus
Simplified Chinese chs
Spanish esm
Swedish svc
Thai tha
Traditional Chinese cht
dj895c.book Page 94 Monday, July 12, 1999 11:31 AM