HP Designjet Z6100 Printing Guide [PS Driver] - How to print a banner [Macromedia FreeHand MX - Mac OS X]

ManualsBrandsHP ManualsPrinterHP Designjet Z6100ps 60-in Printer

HP LF Printing Knowledge Center

How to print a banner/poster

Application: Macromedia FreeHand MX

Printer: HP Designjet Z6100 series

Software: HP PS Driver

Operating System: Mac OS X

Summary of content (8 pages)

PAGE 1
HP LF Printing Knowledge Center How to print a banner/poster Application: Macromedia FreeHand MX Printer: HP Designjet Z6100 series Software: HP PS Driver Operating System: Mac OS X 1
PAGE 2
1. First recommendations: • I order to get a correct display, it’s also essential to have the monitor calibrated, refer to the Profile my monitor document. • See the Media type functionality & features and choose the most appropriate media. • Ensure that the Paper Type setting on the front panel corresponds to the paper that you intend to use. It is essential that the paper is correctly color calibrated for the printer; refer to the Calibrate my printer document.
PAGE 3
• • Setup button: o Monitor: Select the current display profile. o Monitor simulates: Composite printer. o Separation printer: Europe ISO Coated FOGRA27 (for Europe), SWOP Printer (for US) and Japan Standard v2 (for Japan). o Intent: Relative Colorimetric. o Check temporally the Composite simulates separations check box to choose the Composite printer profile. o Composite printer: Select the profile of the printer and media type you will use to print (ex.
PAGE 4
6. o Orientation: Select the orientation of your image on the paper. o Click OK. Print your banner; File menu > Print…: • Printer: Select the printer (ex. HP Designjet Z6100ps 42in Photo). • Image Quality tab: o Quality Options: Select Standard and drag the slider to Quality.
PAGE 5
• Select Paper Handling tab: o Destination Paper Size: Select the paper size you define on Custom Paper Size. Make sure that the document size is not bigger than the paper size you have in the printer.
PAGE 6
• Color Options tab: o Select Print In Color. o Select Color Management > Application Managed Colors. o Click Preview button. If the preview shows any defect, click Cancel button; adjust the appropriate settings and repeat step 8.
PAGE 7
. Click Print to proceed with printing or Cancel to cancel the job.
PAGE 8
For more information on HP Designjet products www.hp.com/go/designjet © 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.