HP Designjet Z6100 Printing Guide [HP-GL/2 Driver] - Working with non-hp papers [Windows]

Working with non-hp papers –Version for firmware 3.x

7. Check your ICC profile settings.

8. The printer will then perform the color calibration for your custom paper (maximum

density and linearity for each ink), which will ensure the best possible output quality.

9. Lastly, the HP Color Center will automatically install the profile in the computer that has

launched the process. If you are using your printer from another computer, remember

to synchronize papers before moving forward. The process is now complete.

Steps for Windows users:

1. Select your Paper Type from Front Panel. “NON-HP PAPERS & PAPER SETTINGS

RECOMMENDED” (Page 2 and 3)

2. Open Easy Printer Care, select “Install ICC Profile”. There you will find the following

options.

Hewlett-Packard