HP Designjet Z6100 Printer Series - User's Guide

8.
Use the winding button on the take-up reel motor to wind the remainder of the paper around the take-
up reel spindle.
9.
Press the OK button on the front panel.
The amount of printed paper that is on the take-up reel spindle appears on the front panel.
10.
Unlock the take-up reel spindle by pushing the spindle lever to its uppermost position.
11.
Remove the roll from the printer, pulling out the end on the right side of the printer first. Do not insert
your fingers into the spindle supports during the removal process.
12.
To remove the roll from the printer after you have unloaded the take-up reel, see
Unload a roll from
the printer on page 36.
View information about the paper
On the printer's front panel, select the icon, and then select View loaded paper > View paper
details.
The following information appears on the front panel:
●
The roll status
●
The paper type that you have selected
View information about the paper 45
Handle the paper