HP Designjet Z2100 Printing Guide [HP Advanced Profiling Solution] - Calibrate my monitor [Mac OS X]

The display is your only reliable way to view your digital files before you print them. Since all

displays change over time, calibration is necessary to bring these devices back into a consistent and

repeatable display condition. The role of the calibration is to adjust the device to produce a desired

behavior. Once the display is calibrated, an ICC device profile will be built to record this device

behavior.

You should calibrate and profile your display on a regular basis, at least once a month. This is highly

recommended. If you are about to start a color critical project, you may wish to recalibrate and

profile your display since it only takes a few minutes to do. Once you calibrate your display, do not

alter it in any way, such as adjusting any of the on board controls. This will invalidate the calibration

and the profile.

Perform the following procedure:

1. Launch HP Advanced Profiling Solution:

Step 1: Select the Profiling button. It will take you to this screen where you can build an ICC

profile for your display.

• Select the Next button to continue with the next step.