HP Designjet T790 and T1300 ePrinter - User's Guide

Printer emulation

If you want to print a particular job and to see approximately the same colors that you would get from

printing the same job on a different HP Designjet printer, you can use the emulation mode provided by

your printer.

NOTE: This option is available only when printing an HP-GL/2, PostScript or PDF job. It will work

correctly only when printing on plain, coated or heavyweight coated paper.

●

In the Windows HP-GL/2 or PostScript driver dialog: select the Color tab, then Printer

Managed Colors, then select Printer Emulation from the Source Profile list. You can then

select from the Emulated Printer list.

●

In the Mac OS Print dialog (non-PostScript printers): select the Color Options panel,

then Color Management > Printer, then select Printer Emulation from the Source Profile

list.

●

In the Mac OS Print dialog (PostScript printers): select the Color Options panel, then

select from the Printer Emulation list.

Color adjustment options

The aim of color management is to print accurate colors. If you perform color management correctly,

then you should be able to print accurate colors with no need of any manual color adjustments.

However, manual adjustments may be useful in the following situations:

●

If your color management is not working correctly for some reason

●

If you want colors that are subjectively pleasing rather than accurate

The printer driver provides different adjustment facilities depending on whether you are printing in color

or in grayscale. If you are printing in pure black and white, there are no color adjustment options.

Printing in color

You can adjust the colors of your print in similar ways under Windows and Mac OS:

●

In the Windows driver dialog: select the Color tab, ensure that the Advanced color

adjustments box is checked, then press the Settings button beside it.

●

In the Mac OS Print dialog (non-PostScript printers): select the Color Options panel,

select Color from the Mode list, then press the Adjust button.

●

In the Mac OS PostScript Print dialog (PostScript printers): select the Color Options

panel, select Color from the Mode list, then press the Adjust button.

Under either operating system, you will then be able to make adjustments using a lightness slider and

three color sliders.

ENWW

Color management from printer drivers