HP Designjet T770 and T1200 Printer Series - Users Guide

●
On the Embedded Web Server's Submit Job page (T1200 series): select Basic settings >
Print quality > Standard options > Speed.
●
Using the front panel: select the Setup menu icon
, then Printing preferences > Print
quality > Select quality level > Fast.
You can specify even faster draft-quality printing by using Economode, as follows. This is intended
mainly for documents containing only text and line drawings.
●
In the Windows driver dialog: go to the Paper/Quality tab and look at the Print Quality
section. Select Custom Options, then set the quality level to Fast and check the Economode
box.
●
In the Mac OS Print dialog (T770, T1200): go to the Paper/Quality panel and set the quality
options to Custom, then set quality to Fast and check the Economode box.
●
In the Mac OS X 10.5 or 10.6 PostScript Print dialog (PostScript printers): go to the Paper/
Quality panel and set the quality options to Custom, then set quality to Fast and check the
Economode box.
●
In the Mac OS X 10.4 PostScript Print dialog (PostScript printers): go to the Image Quality
panel and set the quality options to Custom, then set quality to Fast and check the Economode
box.
●
On the Embedded Web Server's Submit Job page (T1200 series): select Basic settings >
Print quality > Custom. Set Quality level to Fast, and Economode to On.
●
Using the front panel: select the Setup menu icon
, then Printing preferences > Print
quality > Enable economode.
NOTE: If the print quality is set from your computer, it overrides the print-quality setting in the front
panel.
High-quality printing
You can specify high-quality printing in the following ways:
●
In the Windows driver dialog: go to the Paper/Quality tab and look at the Print Quality
section. Move the print-quality slider to the extreme right ('Quality').
● In the Mac OS Print dialog (T770, T1200): go to the Paper/Quality panel and move the print-
quality slider to the extreme right ('Quality').
●
In the Mac OS X 10.5 or 10.6 PostScript Print dialog (PostScript printers): go to the Paper/
Quality panel and move the print-quality slider to the extreme right ('Quality').
●
In the Mac OS X 10.4 PostScript Print dialog (PostScript printers): go to the Image Quality
panel and move the print-quality slider to the extreme right ('Quality').
● On the Embedded Web Server's Submit Job page (T1200 series): select Basic settings >
Print quality > Standard options > Quality.
●
Using the front panel: select the Setup menu icon
, then Printing preferences > Print
quality > Select quality level > Best.
NOTE: If the print quality is set from your computer, it overrides the print-quality setting in the front
panel.
ENWW High-quality printing 57
Printing