HP Designjet T2300 eMFP Series - Using Your Product
●
Restore an earlier firmware version
●
External hard disk options
●
Reset factory defaults
NOTE: The administrator password can contain only characters that appear on the front panel's on-
screen keyboard. If you set a new password with the Embedded Web Server, it will reject characters
that do not appear in that limited character set.
Embedded Web Server security settings
From the Embedded Web Server, you can select the Security tab to control access to the product in
various ways:
●
Specify separate administrator and guest passwords to control access to the Embedded Web
Server
●
Enable or disable Ethernet and USB connections to the product
●
Enable or disable various groups of front panel operations
●
Use the same security settings that are available in the front panel (see above)
NOTE: An administrator password may be required.
NOTE: For more information, see the Embedded Web Server's online help.
Disable your HP ePrint Center connection
You can disable the connection to the HP ePrint Center if required for security. At the front panel, press
, then , then Connectivity > HP ePrint Center > HP ePrint Center settings > HP
ePrint Center connectivity and select Disable.
Disable just puts the remote printing function on hold. If you want to resume using it, you just need to
re-enable it in the same menu. No more setup steps are required at the HP ePrint Center website or in
HP Designjet ePrint & Share.
If you want to disable remote printing permanently, select Disable permanently, which erases your
product from your HP ePrint Center account. To use remote printing again, you will need to set it up
again from scratch (see
Set up your Web-connected product on page 28).
NOTE: You can prevent non-administrators from changing these options by setting an administrator
password in the Embedded Web Server (Setup > Security).
Require account ID
If you want to keep records of product usage by different user accounts, you can set your product to
require an account ID for each job.
●
In the HP Utility for Windows: select Settings > Accounting > Require account ID.
●
In the HP Utility for Mac OS: select Configuration > Printer Settings > Configure
Printer Settings > Accounting > Require account ID.
40 Chapter 3 Setting up the product ENWW