HP Designjet T790 and T1300 ePrinter Series - Using your printer

Communication ports
1. Hi-Speed USB device port, to connect a computer
2. Fast (T790) or Gigabit (T795/T1300) Ethernet port, to connect to
a network
3. Diag
nostic LEDs, to b
e used by service engineers
4. Hi-Speed USB host port, intended for connecting an accessory
There is another Hi-Speed USB host port on the other side of the printer, beside the front panel,
intended for connecting a USB flash drive.
The wall spacers
If you place the printer with its back against a wall, lower the two wall spacers at the rear of the printer
to ensure that the rear of the printer is a minimum distance from the wall. Otherwise, you may
experience paper advance problems.
8 Chapter 1 Introduction ENWW