HP Designjet T1120 HD-MFP - Assembly Instructions: English

Close the scanner cover and push down
on the top to lock it into place.
43
Switch on the scanner and leave it to
warm up until the orange light goes
off, and the green (ready status) light
appears.
44
When the green (ready status) light has
appeared, switch on the touch screen.
45
Note: if when switching on the touch
screen a No scanner was found message
appears, please press the Rescan
option on the touch screen.
To initialise: choose your language
(below), read the license agreement,
press I Agree, and hide the getting
started window.
46
Alignment and calibration
You are now required to calibrate the
scanner. For this you will need the
scanner maintenance sheet, found in the
protective folder shown below.
Important: when setting up for the rst
time, make sure that the scanner is turned
on for at least one hour before moving
on to the next step of camera alignment
calibration. Slight light intensity changes
and camera shifting can occur just after
turning the scanner on, and warm-up
time will ensure that light conditions and
camera heights have stabilized.
Dry the white background plate, rollers,
and surrounding area fully using a sepa-
rate clean, dry lint-free cloth.
42
HP DesignJet Information EngineeringHP DesignJet Information Engineering