HP Designjet Printers - Security Features

HP Designjet Printer Series Security Settings

Firewall. Use this page to view or configure a firewall policy. A firewall policy consists of up to 10 rules,

where each rule specifies the IP addresses and services allowed by the print server and device. To add a rule,

click ‘Add Rule’. This setting runs a wizard that will help you configure each rule.

IPsec / Firewall. Use this page to view or configure an IPsec / firewall policy. An IPsec / firewall policy

consists of up to 10 rules. As with a firewall policy, each rule specifies the IP addresses and services allowed by

the print server and device. With IPsec support, you can apply IPsec authentication and encryption protocols for

those addresses and services. To add a rule, click ‘Add Rule’. This runs a wizard that will help you configure

each rule.

For a detailed description of wizard settings and additional help, click

Jetdirect IPsec/Firewall Help.

3.9 SNMPv3

You can enable and disable the SNMP v3 agent from your printer. You may set up an account that allows a

management application to access the SNMP v3 agent.