HP Designjet L65500 Printer and HP Scitex LX Printer Family - Installation guide (third edition)
Table Of Contents
- Safety precautions
- Introduction
- Receive the shipment
- Set up the printer in the final position
- Connect the power cables
- Configure the electrical system
- Purge the ink system
- Prepare the printer
- Prepare for printing
- Prepare the HP Internal Print Server (Japan and Russia only)
- Manually configure the printer’s IP address
- Change the Windows Vista language
16. Remove the tape covering the OMAS window on the print platen.
17. Remove the tapes covering the temperature sensors.
18. Remove the plastic covering from the carriage access door , front panel and central cover.
19. Remove tape from the Curing Plate.
20. Remove foam pieces from the left and right.
21. Remove foam pieces from the rear beam structure.
ENWW Remove additional packaging 21