HP Designjet H35000 and H45000 Printer Series - HP UV Printhead Flush (MSDS)

Hazardous Material
Identification System:
Health
1
Fire hazard
1
Reactivity
0
3. COMPOSITION/INFORMATION ON INGREDIENTS
COMPONENTS CAS No. CONTENTS
2-(2-ETHOXYETHOXY)ETHYL ACETATE 112-15-2 60-100%
4. FIRST AID MEASURES
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Check for and remove
any contact lenses. Get medical attention if irritation occurs.
Skin Contact: Flush contaminated skin with plenty of water. Remove contaminated
clothing and shoes. Get medical attention if symptoms occur. Wash
clothing before reuse. Clean shoes thoroughly before reuse.
Inhalation: Move exposed person to fresh air. Keep person warm and at rest. If not
breathing, if breathing is irregular or if respiratory arrest occurs,
provide artificial respiration or oxygen by trained personnel. It may be
dangerous to the person providing aid to give mouth-to-mouth
resuscitation. Get medical attention if symptoms occur.If unconscious,
place in recovery position and get medical attention immediately.
Maintain an open airway. Loosen tight clothing such as a collar, tie,
belt or waistband.
Ingestion: Wash out mouth with water. Remove dentures if any. Move exposed person
to fresh air. Keep person warm and at rest. If material has been
swallowed and the exposed person is conscious, give small quantities of
water to drink. Stop if the exposed person feels sick as vomiting may be
dangerous. Do not induce vomiting unless directed to do so by medical
personnel. If vomiting occurs, the head should be kept low so that vomit
does not enter the lungs. Get medical attention if symptoms occur. Never
give anything by mouth to an unconscious person. If unconscious, place
in recovery position and get medical attention immediately. Maintain
an open airway. Loosen tight clothing such as a collar, tie, belt or
waistband.
Protection of first aid providers: No action shall be taken involving any personal risk
or without suitable training.
5. FIRE FIGHTING MEASURES
Flammability of the product: No specific hazard.
Products of combustion: These products are carbon oxides (CO, CO
2
).
NFPA Rating
Special exposure hazards: Not available.
Special protective equipment for fire-
fighters: Fire-fighters should wear
appropriate protective equipment and
Self-contained breathing apparatus
(SCBA) with a full face-piece operated
in positive pressure mode.
Print Head Flush for HP Designjet H35000/H45000 & HP Scitex FB900 Printer Series MSDS, Page 2 of 5