HP Designjet H35000 and H45000 Printer Series - 3M Light Magenta UV Ink 5481 (MSDS)

3M MATERIAL SAFETY DATA SHEET 3M 5481 Light Magenta Inkjet Ink 03/12/2007
_________________________________________________________________________________________________
Page 4 of 7
8.2.1 Eye/Face Protection
Avoid eye contact with vapors, mists, or spray.
The following eye protection(s) are recommended: Safety Glasses with side shields, Indirect Vented Goggles.
8.2.2 Skin Protection
Wear appropriate gloves, such as Nomex, when handling this material to prevent thermal burns. Avoid skin contact. Avoid skin
contact with hot material.
Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with
your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.
Gloves made from the following material(s) are recommended: Nitrile Rubber.
8.2.3 Respiratory Protection
Avoid breathing of vapors, mists or spray.
Select one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance with
OSHA regulations: Half facepiece or fullface air-purifying respirator with organic vapor cartridges. Consult the current 3M
Respiratory Selection Guide for additional information or call 1-800-243-4630 for 3M technical assistance.
8.2.4 Prevention of Swallowing
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.
8.3 EXPOSURE GUIDELINES
Ingredient Authority Type Limit Additional Information
1,6-HEXANEDIOL DIACRYLATE AIHA TWA 1 mg/m3 Sensitizer
BENZOPHENONE AIHA TWA 0.5 mg/m3
ISOOCTYL ACRYLATE 3M TWA 5 ppm
ISOOCTYL ACRYLATE AIHA TWA 5 ppm
TETRAHYDROFURFURYL ACRYLATE 3M TWA 0.1 ppm
TETRAHYDROFURFURYL ACRYLATE 3M STEL 0.3 ppm
SOURCE OF EXPOSURE LIMIT DATA:
ACGIH: American Conference of Governmental Industrial Hygienists
CMRG: Chemical Manufacturer Recommended Guideline
OSHA: Occupational Safety and Health Administration
AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL)
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Specific Physical Form:
Liquid
Odor, Color, Grade:
Acrylate Odor, Magenta Color
General Physical Form:
Liquid
Autoignition temperature
No Data Available
Flash Point
> 200 ºF [Test Method: Closed Cup]
Flammable Limits - LEL
No Data Available
Flammable Limits - UEL
No Data Available
Boiling point
> 200 ºF
Density
1.04 g/ml
Vapor Density
> 1 [Ref Std: AIR=1]
Vapor Pressure
< 10 mmHg [@ 20 ºC]