HP DESIGNJET D5800 Production Printer - 60-in printer Assembly Instructions

19
x2
x1
7
x1
EN
KO
ZHCN
ZHTW
Roll the stand assembly into its upright position.
Putar rakitan dudukan ke posisi tegak.
Use four screws to attach the foot to the right leg.
Tighten each screw half-way, and then gradually tighten
each screw completely.
Gunakan empat sekrup untuk memasang pijakan
ke kaki kanan. Kencangkan setiap sekrup
setengah penuh, kemudian kencangkan perlahan
sampai terkunci sepenuhnya.
Attach the left stand spacer to the top of the left leg. It
will “click” into place.
Pasang bantalan dudukan kiri di atas kaki kiri.
Bantalan akan ‘terkunci’ pada tempatnya.
Attach the right stand spacer to the top of the right leg.
It will “click” into place.
Pasang bantalan dudukan kanan di atas kaki
kanan. Bantalan akan ‘terkunci’ pada tempatnya.
20 21
x4
22
Hewlett-Packard Company - Learning Products - Barcelona