HP DesignJet ColorPro - Getting Started Guide
Step 9 – Change the Language Displayed on the Printer’s Control Panel
HP DesignJet ColorPro Series: Getting Started Guide 11
For the HP DesignJet ColorPro CAD printer, software supplied
includes:
• ADI driver for AutoCAD
• HP-GL/2 driver for Windows applications
Follow the instructions supplied with the printer software.
Step 9 – Change the Language Displayed on the Printer’s Control Panel
You can change the printer’s control panel display to the
following languages:
• English, German, French, Italian, Spanish, Norwegian, Dutch,
Portuguese, Finnish, Swedish, Danish, Polish, Czech or
Russian.
To do so:
1. Power off your printer.
2. Press and hold [Menu] and power on your printer.
3. Wait until the display shows “LANG=X” (where “X” is the
current language setting and is in that language).
4. Release the [Menu] button.
5. Press [Value] to scroll through the language list.
6. Press [Select] to choose and confirm your language selection.
Step 10 – Install Additional Memory
If you find that the amount of memory in your printer is
insufficient for your requirements, you can install additional
memory modules.
CAUTION: Make sure the printer is switched off at the power isolator
switch at the front of the printer, and that the power cord and
the interface cable are disconnected.
• The memory expansion module contains electrical components
that are easily damaged by small amounts of static electricity.
Please read the following information carefully before you
handle the memory expansion module: