HP DesignJet 755CM Printer User's Guide - C3198-60051

3-6
Company confidential. Postillo/755CM User’s Guide Final Freeze Status:Frozen
This is the cyan on page 3-6 (seq: 74)
This is the black on page 3-6 (seq: 74)
Combinations of Media Type and Print Quality
The table below shows that some combinations of media type and print quality are
not recommended.
Media Type on the
Front-Panel Display
Print Quality
(Set Either on the Front Panel or In the Software)
Fast Normal Best
Coated paper OK
OK
OK
Heavy coated paper OK OK OK
Matte film OK OK
OK
Clear film OK OK OK
High-gloss photo Not
recommended
OK OK
Semi-gloss photo Not
recommended
OK OK
High-gloss film Not
recommended
OK OK
Opaque bond OK OK OK
Translucent bond OK
in monochrome
only
OK
in monochrome
only
OK
in monochrome
only
Natural tracing paper OK OK OK
Vellum
OK
OK OK
IMPORTANT. If you are using an add-on a third-party Raster Image Processor (RIP), in order to
create additional print modes on your printer, then the above table may not apply.
In this case, consult your RIP vendor for advice on the best settings for your
requirements. A clue as to whether you are using a RIP or not is the message on
the printer’s front panel while it is printing. If the message “
STATUS / Printing
(special)
” appears, then you are using a RIP. If the message “STATUS / Printing”
appears, then you are probably not using a RIP.
Working with Media and Cartridges
Choosing Media