HP DesignJet 755CM Printer User's Guide - C3198-60051

1-9
Company confidential. Postillo/755CM User’s Guide Final Freeze Status:Frozen
This is the cyan on page 1-9 (seq: 25)
This is the black on page 1-9 (seq: 25)
3
Remove the new roll from its wrapping. Remove the endcap from the top
of the spindle, and slide the new roll onto the spindle. The leading edge of
the media must wind clockwise.
If the media stop falls off, push it back
in until it snaps into position.
Endcap removed.
A
0015
4
Push the endcap back in, making sure that the tabs are flush against the ends of
the roll. Push it far enough to be firm, but do not use excessive force as this
may break the tabs.
B
0016
Setting Up the Printer
Task 3: Load Media
SETUP
1