HP DesignJet 700/750C Plus Plotters Quick Reference Guide - C4705-90041

Company confidential. Murillo QRG. Edition 1. Freeze Status: not frozen

This is the cyan on page 18 (seq: 18)

This is the black on page 18 (seq: 18)

To Cancel a Plot

Press Cancel on the front panel.

Cancel

The plotter advances the media as though the plot were finished.

0027

If queueing is on and there is space in the queue, the cancelled plot is

placed in the queue.

To Replot or Delete a Plot

In the case of the HP DesignJet 700 only, press Replot on the front panel.

You can also replot a page in the queue (including a cancelled plot) by

using the front-panel

Copies option from Queue mgmt/Page ID.

You can delete a page from the queue using the front-panel

Delete option

accessible from

Queue mgmt/Page ID.

For further information on these features, see the User’s Guide.

To Pause while Printing a Series of Plots

You can pause between two plots already sent from your computer, for

example to change the media type or replace the cartridges. You can use

the front panel as normal during the pause.

Press Pause on the front panel.

Pause

The plotter finishes the current plot and pauses (with the Pause

light on).

0027

To resume printing, press Pause again.

Localization Note. Identical to 750C/QRG except for “Replot” section and penultimate

sentence change.