HP Designjet Printers - Security Features

HP Designjet Printer Series Security Settings
17
Notes:
Some printers only have 1-level password access to the Embedded Web Server.
The networking tab of the Embedded Web Server enables you to set up another password. If the printer
has an EWS 1-level or multi-level password, then the networking password is the same as the general
EWS password. If the EWS does not have password capabilities, then the networking password is only
used for controlling access to the networking area of the EWS.
For most printers that have EWS password capability, it is also possible to setup the Admin password
through Web JetAdmin. Only one level can be set in this way, however, so the Guest password cannot be
set up from Web JetAdmin.
Passwords have no minimum complexity requirements, so the minimum password length is 1 character.
Eprinters with touch screen front panels only allow the use of the limited set of characters shown below
(capital letters are also supported).
These limitations do not apply to printers without touch screen front panels, as the password can be set
using EWS.