HP Designjet 500 Plus - Pocket Guide

4 Removing Jammed Paper
2 Switch the printer off at the front.
3 If necessary, carefully move the printhead
carriage out of the way—if possible all the
way to the enclosed area on the left or the
right. Which way you are able to move it
depends on where the paper is jammed.
CAUTION When moving the printhead
carriage, touch only the black plastic parts.
4 If necessary, carefully move the paper
cutter out of the way to the left, or to the
right depending on where the paper is
jammed (though if moved right it may block
the paper path).
CAUTION The cutter is easily moved by
holding it as close as possible to the guide
running across the width of the printer. Be
careful not to touch the metal slider bar that
runs across the printer.
Slider bar
Guide