488CA Printer - User's Guide

2–16

Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open

This is the blue on page 2–16 (seq: 58)

This is the black on page 2–16 (seq: 58)

Loading roll media

To change the roll

You can order spare spindles as accessories—see page 10–19. In this way, you can

keep different rolls on different spindles and make this task easier. However,

except where noted, this section assumes that you are using the same spindle for

both the old and the new roll.

1 If you are using the legs option, be sure the printer wheels are locked (the brake

lever pressed down) to prevent the printer from moving.

In the next step:

Don’t touch the plastic strip that runs the length of the printer behind the

cartridge carriage.

Keep hair, jewelry, clothing, and foreign objects away from the printer

mechanisms.

2 If the old roll is not used up, then remove the media from the media path, as

explained here.

a Lower the media lever to release the media; raise the printer cover and lift the

bail.

b Turn the roll on the spindle to wind the media out of the printer and onto the

roll.

c Raise the media lever.

Localization Note.

WARNING

Working with media

Loading roll media

Localization Note.