488CA Printer - User's Guide

2–15

Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open

This is the blue on page 2–15 (seq: 57)

This is the black on page 2–15 (seq: 57)

5 The printer checks the alignment again. While it’s doing this, the Ready light on

the front panel flashes.

Wait until ...

Either the

Ready light stops flashing, but stays

on:

Alignment good—ready to print!

Or the Media light starts flashing:

Alignment bad. The printer has rejected the

sheet. Simply remove it and start again from step

6 on page 2–10.

Notice that you have only one chance to realign the media manually. If it’s still

not right after the realignment, you have to load it again.

Localization Note.

Working with media

Realigning sheet media

MEDIA

READY

This is the green on page 2–15 (seq: 57)

READY

MEDIA

This is the red on page 2–15 (seq: 57)